”Amazingly simple and easy to use.”
Cabinetmaker magazine editorial
*Splitter moves left or right to align perfectly with any blade.
*Change splitter pin diameter to match blade kerf.
*Unscrew and remove splitter in seconds with your fingers.
*Two “easyout” screw hook splitter pins included- .075 and.115 for thin kerf and 1/8” blades.
*Easily install into a 1/2” zero clearance throatplate. Just drill a 3/4” diameter hole, 1/4” deep into the plate. Splitter holder is held in place with a screw after splitter is rotated into alignment with blade.
*Resists kickback better than fin type splitters.
$9.95
Pat. # 6715388B1
www.grip-tite.com
1-800-475-0293